CDT FakeDrones designs and builds fixed-wing interceptor UAS around industrial 3D printing — low unit cost, resilient in GPS-denied conditions, and repairable in the field in minutes.
A managed farm of industrial FDM printers produces structural airframe modules in engineering polymers, with per-part material traceability and central scheduling.
A redundant flight-controller stack fuses multi-constellation GNSS, inertial, and visual navigation for autonomous operation when satellite positioning is jammed or spoofed.
An ISO 9001 quality system and ISO 27001 information-security system, aligned to AQAP 2110, with EU regulatory liaison run from our Toulouse lab.
Our Lviv subsidiary runs forward production, field test, operator training, and a direct feedback loop from real operational use into engineering.
Two airframes sharing one avionics architecture, plus a common ground control station. Engagement payload is configured per operator under separate controlled documentation.
Refshalevej 163A, 1432 Copenhagen K, Denmark
R&D, avionics integration, final assembly & QA.
CDT FakeDrones ApS · CVR 41 88 20 17
12 Rue de l'Aérodrome, 31400 Toulouse, France
EU certification liaison, composites & polymer materials lab.
CDT FakeDrones France SAS · SIRET 894 217 663 00024
vul. Heroiv UPA 73, Lviv 79019, Ukraine
Forward production, field test, in-theatre support & training.
TOV CDT FakeDrones Ukraine · EDRPOU 43029187
A compact, senior team of 10 running a disciplined quality system across all three sites. Every structural part carries a traceability record before it enters assembly.
Talk to us about interceptor UAS for your operation.